AirTAC Standard Cylinders
AirTAC SC Series Cylinder
AirTAC SC series tie-rod cylinders feature a two-way piston seal with grease reservation, a body shorter than ISO15552 at the same bore, and seals rated to 150°C.
View PDF
AirTAC SC Series-Big bore size type
ISO6430-standard AirTAC SC series tie-rod cylinders feature a two-way piston seal with grease reservation, a body shorter than ISO15552 at the same bore, and seals rated to 150°C.
View PDF
AirTAC SCT Series-Multi-position type
Tie-rod cylinder with a two-way piston seal and grease reservation, allowing the piston rod to stop at several positions throughout its stroke rather than only fully extended or retracted, with seals rated to 150°C.
View PDF
AirTAC SAU Series Cylinder
SU series no-tie-rod cylinder: profile-tube barrel with good corrosion resistance, two-way piston seal with oil reservation, shorter than ISO15552 at the same bore, seals rated to 150°C.
View PDF
AirTAC SAUF Series-With valve type
SAUF integrated-valve cylinders use a 4M210 valve (32-50mm bore) or 4M310 (63-100mm bore) for individual control with no extra solenoid valves, saving space for decentralized installation.
View PDF
AirTAC ISO 15552 Cylinder SAI Series
ISO15552 (ISO6431) standard cylinder with a two-way Y-shape piston seal offering compensation, long service life, and low start-up pressure, plus a no-tie-rod aluminum profile body with corrosion resistance and sensor grooves on both sides.
View PDF
AirTAC SAIF Series-With valve type
SAIF integrated-valve cylinders use a 4M210 valve for 32-50mm bore or 4M310 for 63-100mm bore, giving individual control with no extra solenoid valves — space-saving for decentralized installation in large systems.
View PDF
AirTAC SAIL Series-With locker type
SAIL lock-type cylinder available with the locking mechanism on the front cover or the rear cover, with a choice of automatic or manual unlocking.
View PDF
AirTAC BSAI Series-Enclasp type
SAIL locking cylinder, based on the SAI series, locks at any position within its stroke via a front- or rear-cover mechanism, with automatic or manual unlocking, independent of piston direction.
View PDF
AirTAC TSAI Series With guide frame
TSAI guide-frame cylinder pairs a guide frame with a standard cylinder: brass bearings resist radial load, linear bearings suit low-friction, high-precision loads, with multi-directional mounting.
View PDF
AirTAC ISO 15552 Cylinder SGC Series
SGC ISO15552 (ISO6431) standard cylinder with an aluminum pipe body and two Y-shape single-direction piston seals offering compensation, long service life, and low start-up pressure, with seals rated to 150°C.
View PDF
AirTAC JIS Cylinder JSI Series
JSI JIS-standard cylinder with a two-way piston seal offering grease reservation, a no-tie-rod corrosion-resistant profile barrel, and a body shorter than an equivalent ISO15552 cylinder at the same bore, with seals rated to 150°C.
View PDFInterested in purchasing or learning more about our products?
